Skip to content
Guide

Video Transcript Example: What It Looks Like and How to Format It

A video transcript example with timestamps and speaker names, the same lines as SRT and VTT captions, and the formatting rules readers and editors expect.

By Serhii MaysonPublished 7 min read

Laptop with a yellow play button beside a tall page of text lines under a teal heading: a video transcript example
A header on top, then a timestamp and a speaker name at each new paragraph.

A video transcript is the spoken words of a video written out as text. It often names each new speaker and adds a timestamp at each new paragraph or every 30–60 seconds. For captions, the same words are split into short timed lines (SRT or VTT). Here's an example of both.

Transcribe your own video here

Video transcript example: one minute of a lecture

This example is made up: one minute of an intro economics lecture, 12 minutes into the video, in clean verbatim, with fillers like "um" left out. Look for the header, a timestamp and a name at each turn, one phrase nobody could make out, and students talking at once.

ECON 101, Lecture 7: Opportunity Cost

Recorded Sept. 18, 2026 · File: econ101-lecture07.mp4 · Excerpt: 00:12:00–00:13:00 · Clean verbatim

Speakers: Dr. Maya Ortiz (lecturer), Student 1, Student 2, Students (several at once)

[00:12:00] Dr. Ortiz: Okay, let's put a number on it. Say you're free on Friday night. You can work a shift at the campus café for $40, or go to a concert you already have a ticket for. If you go to the concert, what does that night cost you?

[00:12:19] Student 1: Nothing? I already paid for the ticket.

[00:12:22] Dr. Ortiz: That's the trap. The ticket's a sunk cost. That money's gone either way. Yes, in the back?

[00:12:30] Student 2: What about the [inaudible 00:12:31]? That costs money too.

[00:12:34] Dr. Ortiz: Good point, the bus fare. Say it's $5. Now going costs you the $40 you didn't earn plus the fare. That's $45, and that's your opportunity cost: what you give up to make a choice. So, concert or café?

[00:12:52] Students: [crosstalk]

[00:12:55] Dr. Ortiz: One at a time! It depends on what the concert is worth to you.

The transcriber didn't guess the missing words, even though Dr. Ortiz's reply hints at them. The tag and its time show an editor where to listen again.

The same lines as SRT and VTT captions

Captions carry the same words in short lines, each with a start and an end time. Here are the example's first 22 seconds as SRT:

187
00:12:00,000 --> 00:12:02,300
Okay, let's put a number on it.

188
00:12:02,500 --> 00:12:04,700
Say you're free on Friday night.

189
00:12:05,000 --> 00:12:08,600
You can work a shift
at the campus café for $40,

190
00:12:08,700 --> 00:12:12,400
or go to a concert
you already have a ticket for.

191
00:12:12,900 --> 00:12:17,800
If you go to the concert,
what does that night cost you?

192
00:12:19,000 --> 00:12:21,900
[Student 1] Nothing?
I already paid for the ticket.

And the same cues as a VTT (WebVTT) file:

WEBVTT

00:12:00.000 --> 00:12:02.300
Okay, let's put a number on it.

00:12:02.500 --> 00:12:04.700
Say you're free on Friday night.

00:12:05.000 --> 00:12:08.600
You can work a shift
at the campus café for $40,

00:12:08.700 --> 00:12:12.400
or go to a concert
you already have a ticket for.

00:12:12.900 --> 00:12:17.800
If you go to the concert,
what does that night cost you?

00:12:19.000 --> 00:12:21.900
[Student 1] Nothing?
I already paid for the ticket.

The differences are small:

  • SRT numbers every cue, puts a comma before the milliseconds and ends each cue with a blank line. The numbers count from the start of the video, so this excerpt, 12 minutes in, starts at cue 187.
  • VTT opens with WEBVTT, puts a period before the milliseconds and doesn't need cue numbers. Its optional voice tag, <v Student 1>, can name the speaker, but a name in brackets works in both formats.

Style guides differ on how long a caption line can be. Netflix's English (USA) guide, checked in November 2026, allows 42 characters per line and two lines per subtitle, and its section on captions for deaf and hard-of-hearing viewers puts speaker IDs in brackets. The Library of Congress's description of SRT gives 32 characters per line. Every line above fits both, and the student gets a bracketed name because viewers may not see who's talking. More in what an SRT file is.

Video transcript format vs captions: a page of paragraphs beside a video frame with caption bars and short stacked lines
Same words, two jobs: TXT or DOCX for reading, SRT or VTT for captions on the video.

What a video transcript looks like, part by part

  • Header. The title, date, file name, speakers and style, so anyone who opens the file later knows what it is.
  • Speaker labels. A name and a colon at each change of speaker, or a role or a number when you don't know the name (Student 1, Speaker 2). TranscribTxt doesn't label speakers, so add names by hand while you check the draft.
  • Timestamps. A time like [00:12:34] at the start of each paragraph lets readers jump to that moment. The formats are in what timestamps in a transcript are.
  • [inaudible 00:12:31]. A word or phrase you can't make out. Its time points to the exact spot inside the paragraph.
  • [crosstalk]. People talking over each other so the words can't be separated. Add the time if it falls mid-paragraph.
  • Sounds and visuals that matter. A tag such as [laughter] or [slide: Opportunity cost], only when it changes the meaning.

Some transcription services use these bracket tags. For accessibility, the W3C's Web Accessibility Initiative says a transcript covers the speech and the non-speech sounds needed to understand the content. People who are both Deaf and blind need a descriptive transcript, which adds the visuals. The same W3C page lists captions at WCAG Level A and a transcript at Level AAA for prerecorded video with sound.

Video transcript format: the checklist

There's no official format. The W3C's guidance says there is "not a set design" for transcripts, and suggests logical paragraphs, headings where they help and speaker names that stand out.

Video transcript format checklist

ElementWhenExample
HeaderAt the top of every transcriptECON 101, Lecture 7 · Sept. 18, 2026 · econ101-lecture07.mp4 · clean verbatim
Speaker nameAt each change of speaker (TranscribTxt doesn't label speakers, so add names by hand)Dr. Ortiz:
Unknown speakerWhen you don't know the speaker's nameStudent 1, Speaker 2
TimestampAt each new paragraph, or every 30–60 seconds in a long monologue if you want them[00:12:34]
Unclear wordsWhen you can't make out a word or phrase[inaudible 00:12:31]
Overlapping speechWhen people talk at once and you can't separate the words[crosstalk] or [crosstalk 00:12:52]
Sounds and visualsOnly when they change the meaning[laughter], [slide: Opportunity cost]
ParagraphsA new one at each speaker or topic change; a few sentences eachShort blocks, no indents
File typeTXT or DOCX to read; SRT or VTT for captionsecon101-lecture07.docx

How to write a transcript of a video in 4 steps

  1. Start with the video file. Use the original MP4 or MOV from your camera, phone or video editor. TranscribTxt takes files up to 2 GB.
  2. Get a machine draft. Upload the file to turn your video to text. On TranscribTxt, the first 30 minutes are free while you have a free file left, and the whole video, up to 3 hours, is $2 once. You can download TXT, SRT and VTT, and a paid transcript also comes as JSON with word times and Word. In October 2026, half of the uploaded files were transcribed in 14 seconds or less, and a 145-minute recording took 2 minutes 45 seconds. Times don't include uploading, which depends on your connection.
  3. Proofread against the timestamps. Open the SRT or VTT, where every caption has its time, or, for a paid transcript, the Word file, which starts each paragraph with its time. The TXT has no times. Play the video from each time and read along. Fix names, numbers and technical terms, add speaker names by hand and tag anything you can't hear as [inaudible] with its time.
  4. Save the right file. Put the header on top and save a DOCX or TXT for readers. For captions, fix the same words in the SRT or VTT too, then upload it as the video's caption file.

For the upload step by step, see how to transcribe a video online. Our guide to transcript file formats compares TXT, SRT, VTT and JSON.

Clean verbatim or verbatim?

Clean verbatim, like the example above, keeps every meaningful word but drops fillers such as "um" and "uh", false starts and stutters. Verbatim keeps all of them. Choose verbatim when how something was said matters, as in some research interviews; for lectures and training videos, clean verbatim reads better. A TranscribTxt draft tends to drop "um" and "uh" already, so it usually starts close to clean verbatim. Name the style in the header and keep it for the whole file. Examples of both are in verbatim vs clean verbatim.

Found an error? Write to support@transcribtxt.com and we'll check and fix it.

Transcribe your own videos with our video to text converter.

Try TranscribTxt free

Free for files up to 30 min: your first one needs no account, a free account gets 3 a week. 99 languages.

First 30 min free · the whole file (up to 3 h) US$2

Try it free

Frequently Asked Questions

What does a video transcript look like?

It looks like a simple text document. A header gives the video's title, date and speakers. Then come paragraphs of the spoken words, each starting with a timestamp like [00:12:34] and the speaker's name. Unclear words are often tagged like [inaudible 00:12:31], and overlapping voices as [crosstalk]. Captions split the same words into short timed lines in an SRT or VTT file.

How do you format a video transcript?

There is no official format, but most transcripts share the same parts. Put a header on top with the title, date, file name, speakers and style (clean verbatim or verbatim). Start a new paragraph at each change of speaker or topic, and begin it with a timestamp, the speaker's name and a colon. Use Student 1 or Speaker 2 when you don't know a name. Mark unclear words as [inaudible] with the time and overlapping speech as [crosstalk], as many transcription services do.

How often should a video transcript have timestamps?

Transcription services commonly offer a timestamp at each new paragraph or speaker, or at a fixed interval such as every 30 seconds or every minute. There is no single standard: the W3C's accessibility guidance says to include timestamps only when they're useful, and that they don't need end times. Captions are different: every SRT or VTT cue has a start and an end time.

Should a video transcript be TXT, DOCX or SRT?

Use TXT or DOCX if people will read it, and SRT or VTT if the words should appear as captions on the video. On TranscribTxt, every transcript downloads as TXT, SRT and VTT, and a paid one also comes as JSON with word times and Word. The TXT has no timestamps; the Word file starts each paragraph with its time.

What's the fastest way to write a transcript of a video?

Let software write the first draft, then check it. Upload the video file to a transcription tool, play it from each timestamp while you read, fix names and numbers, and add speaker names by hand, since TranscribTxt doesn't label speakers. On TranscribTxt, the first 30 minutes are free while you have a free file left, and the whole video, up to 3 hours, is $2 once.

Back to all guides